Hi. I bought a Lennar home and it came pre-installed with Ruckus r510 and ICX 7150 C12P. I’m getting around 100 Mbps from speed tests while on the r510. However, on my Asus, I’m pulling around 580 Mbps. I believe the issue is that I’m uplinked from the r510 to the ICX at 100 Full. I can’t seem to change the NIC port speeds on my r510 to 1000 Mbps Full. Below are the CLI output from the r510 and ICX. The r510 is connected to port 1/1/1. Port 1/1/3 is uplink to my AT&T modem. I’m running 200.6.10.1.312 on the r510.telnet@ICX7150-C12 Switch#sh int briefPort Link State Dupl Speed Trunk Tag Pvid Pri MAC Name1/1/1 Up Forward Full 100M None No 1 0 c0c5.2093.a9431/1/2 Down None None None None No 1 0 c0c5.2093.a9441/1/3 Up Forward Full 1G None No 1 0 c0c5.2093.a9451/1/4 Down None None None None No 1 0 c0c5.2093.a9461/1/5 Up Forward Full 100M None No 1 0 c0c5.2093.a9471/1/6 Down None None None None No 1 0 c0c5.2093.a9481/1/7 Down None None None None No 1 0 c0c5.2093.a9491/1/8 Up Forward Full 100M None No 1 0 c0c5.2093.a94a1/1/9 Up Forward Full 100M None No 1 0 c0c5.2093.a94b1/1/10 Up Forward Full 100M None No 1 0 c0c5.2093.a94c1/1/11 Down None None None None No 1 0 c0c5.2093.a94d1/1/12 Down None None None None No 1 0 c0c5.2093.a94e1/2/1 Down None None None None No 1 0 c0c5.2093.a9501/2/2 Down None None None None No 1 0 c0c5.2093.a9511/3/1 Down None None None None No 1 0 c0c5.2093.a9521/3/2 Down None None None None No 1 0 c0c5.2093.a953mgmt1 Down None None None None No None 0 c0c5.2093.a943ruckus> enruckus# show configProtocol Mode= IPv4-OnlyDevice IP Address: Mode= DHCP IP Address= 192.168.1.70 Netmask= 255.255.255.0 Gateway Address= 192.168.1.254 Primary DNS= 192.168.1.254 Secondary DNS=Country Code: Code= United StatesIdentity: Name= Ruckus-UnleashedSession Statistics: Enable= false Limited Unauthorized Session= trueNTP: Status= Enabled Address= ntp.ruckuswireless.com Timezone= GMTLog: Status= Disabled Address= Facility= Priority= AP Facility= AP Priority= event log level= 1Bonjour Service: Status= EnabledTelnet Server: Status= DisabledFTP Server: Status= Enabled Anonynous Status= DisabledUnleashed Multi-Site Manager: Status= Disabled Address= Interval= 3login warning: Status= Disabled content= “Warning, you are logging into device for authorized user only. If yo u are not an authorized user, please click Quit; otherwise click Continue to log in.”LWAPP: MGMT queue length threshold to drop AUTH frame = 100 MGMT queue length threshold to resume processing AUTH frame = 25EAPoL Key no Retry: Status= DisabledUnleashed Network: Token= un1619020082171532588476075AAA: ID: 1: Name= Local Database Type= Local 2: Name= Guest Accounts Type= GuestDHCP servers for DHCP relay agent:Administrator Name/Password: Name= admin Password= Authenticate: Mode= Authenticate using the admin name and passwordManagement ACL:AP: ID: 1: MAC Address= 1c:3a:60:36:ae:d0 Model= r510 Approved= Yes Device Name= RuckusAP Device Role= Master Description= Location= GPS= CERT = Normal Bonjour-policy= Bonjour-fencing= Group Name= System Default Channel Range: A/N= 36,40,44,48,149,153,157,161 (Disallowed= ) B/G/N= 1,2,3,4,5,6,7,8,9,10,11 (Disallowed= ) Radio a/n: Channelization= Auto Channel= Auto WLAN Services enabled= Yes Tx. Power= Auto WLAN Group Name= Default Call Admission Control= OFF Protection Mode= Auto Radio b/g/n: Channelization= Auto Channel= Auto WLAN Services enabled= Yes Tx. Power= Auto WLAN Group Name= Default Call Admission Control= OFF Protection Mode= 2 Override global ap-model port configuration= No Network Setting: Protocol mode= IPv4-Only Device IP Settings= DHCP IP Address= 192.168.1.70 Netmask= 255.255.255.0 Gateway= 0.0.0.0 Primary DNS Server= 192.168.1.254 Secondary DNS Server= Mesh: Status= Disabled LLDP: Status = Use Parent Setting LAN Port: 0: Interface= eth0 Dot1x= None LogicalLink= Up PhysicalLink= Up 100Mbps full Label= 10/100/1000 PoE Port1 1: Interface= eth1 Dot1x= None LogicalLink= Down PhysicalLink= Down Label= 10/100/1000 Port2 PoE Mode= AutoSmart Redundancy: Status= Disabled Peer IP/IPv6 Address= Shared Secret=IPv4 Management Interface: Status= Disabled IP Address= Netmask=L2/MAC ACL: ID: 1: Name= System Description= System Restriction= Deny only the stations listed below Stations:SNMP Agent: Status= Disabled Contact= Location= RO Community= public RW Community= privateSNMP Trap: Format= Version2 Status= DisabledSNMPV3 Agent: Status= Disabled Ro: User= Authentication Type= MD5 Authentication Pass Phrase= Privacy Type= DES Privacy Phrase= Rw: User= Authentication Type= MD5 Authentication Pass Phrase= Privacy Type= DES Privacy Phrase=SNMP Trap: Format= Version3 Status= DisabledWLAN Service: ID: 1: NAME = House14 Tx. Rate of Management Frame(2.4GHz) = 2.0Mbps Tx. Rate of Management Frame(5GHz) = 6.0Mbps Beacon Interval = 100ms SSID = House14 Description = House14 Type = Standard Usage Authentication = open Encryption = wpa2 Algorithm = aes Passphrase = FT Roaming = Disabled 802.11k Neighbor report = Disabled Web Authentication = Disabled Authentication Server = Disabled Accounting Server = Disabled Called-Station-Id type = wlan-bssid Tunnel Mode = Disabled DHCP relay = Disabled Max. Clients = 100 Isolation per AP = Disabled Isolation across AP = Disabled Zero-IT Activation = Disabled Load Balancing = Enabled Band Balancing = Enabled Dynamic PSK = Disabled Auto-Proxy configuration: Status = Disabled Inactivity Timeout: Status = Disabled VLAN-ID = 1 Dynamic VLAN = Disabled Closed System = Disabled Https Redirection = Disabled OFDM-Only State = Disabled Multicast Filter State = Disabled 802.11d State = Disabled Force DHCP State = Disabled Force DHCP Timeout = 0 DHCP Option82: Status = Disabled Option82 sub-Option1 = Disabled Option82 sub-Option2 = Disabled Option82 sub-Option150 = Disabled Option82 sub-Option151 = Disabled Ignore unauthorized client statistic = Disabled STA Info Extraction State = Enabled BSS Minrate = Disabled DTIM period = 1 Directed MC/BC Threshold = 5 Call Admission Control State = Disabled PMK Cache Timeout= 720 minutes PMK Cache for Reconnect= Enabled NAS-ID Type= wlan-bssid Roaming Acct-Interim-Update= Disabled PAP Message Authenticator = Enabled Send EAP-Failure = Disabled L2/MAC = No ACLS L3/L4/IP Address = No ACLS L3/L4/IPv6 Address = No ACLS Precedence = No ACLS Proxy ARP = Disabled Device Policy = No ACLS Vlan Pool = No Pools Role based Access Control Policy = Disabled SmartRoam = Disabled Roam-factor = 1 White List = No ACLS Application Recognition & Control = Disabled Apply ARC Policy = NO POLICY Client Flow Data Logging = Disabled Wlan Bind = allWLAN Group: ID: 1: Name= Default Description= Default WLANs for Access Points WLAN Service: WLAN1: NAME= House14 VLAN=