Hi,
I have configured a stand-alone static switch (Cisco 3550) with three DHCP pools associated to different VLANS. Clients connected to vlan 1 would get IP addresses in range of 192.168.0.X, vlan 10 would be in the range of 192.168.1.X & vlan 20 in the range of 192.168.2.X … Three different interfaces were configured with all three vlans (For Eg: Port 1 with vlan 1, port 2 with vlan 10 & port 3 with vlan 20). The same were tested by connecting a computer to all three ports and was successfully able to obtain a DHCP ip address in the respective range.
However, when i configure my Ruckus access point with the above mentioned vlan for different profiles, it doesn’t seem to work. Three different wireless profiles are created viz. Ruckus@1(Vlan 1), Ruckus@2(Vlan 10) & Ruckus @3(Vlan 20).. Ruckus@3 was enabled & was connected to port no 3 of the switch, yet failed to obtain an IP address for my wireless client.. Can anyone let me know in case if i am doing anything wrong at the Access point end as i am sure the switch configuration is correct?
Thanks in advance!