HPE ProLiant DL380 Gen10 Entry SMB – rack-mountable – Xeon Silver 4208 2.1

Cache Memory
Type :L3 cache
Per Processor Size :11 megabyte, 11 megabyte
Installed Size :11 megabyte

RAM
Form Factor :DIMM 288-pin
Technology :DDR4 SDRAM
Installed Size :16 GB
Max Supported Size :1 TB, 1.5 TB
Configuration Features :1 x 16 GB
Data Integrity Check :Advanced ECC
Slots Qty :12, 24
Empty Slots :11, 23
Memory Speed :2400 megahertz
Rated Memory Speed :2933 megahertz
Features :Dual rank, HPE SmartMemory, Registered, Slots 13 – 24 are available in two-processor configuration only

Type :Serial ATA
Interface Type :Serial ATA-600
Storage Controller Name :HPE Smart Array S100i SR Software
Channel Qty :14
Installed Qty :1

Networking
Ethernet Controller(s) :HPE 331i
Remote Management Controller :Integrated Lights-Out 5
Data Link Protocol :Ethernet, Fast Ethernet, Gigabit Ethernet
Ethernet Ports :4 x Gigabit Ethernet
Remote Management Protocol :IPMI 2.0, SMASH CLP, SNMP 3
Features :PXE support, Wake on LAN (WoL)

Expansion Bays
Bays :12 (total) / 12 (free) x hot-swap 3.5″ LFF

Expansion Slots
Slots :1 (total) / 1 (free) x FlexibleLOM, 1 (total) / 1 (free) x microSD Card (internal), 1 (total) / 1 (free) x PCIe 3.0 x16 – half-length, full-height, 2 (total) / 2 (free) x PCIe 3.0 x8 – half-length, full-height

Interface Provided
Interfaces :1 x HP iLO – RJ-45 (1 rear), 1 x HP iLO – Type A (1 in front), 1 x HPE iLO – RJ-45 (1 rear), 1 x HPE iLO – Type A (1 in front), 1 x VGA (1 rear), 12 x SATA-600, 4 x LAN (Gigabit Ethernet) – RJ-45, 5 x USB 3.0 (1 front, 2 rear, 2 internal)

Power Device
Type :Power supply – hot-plug, Power supply – hot-plug / redundant
Power Redundancy :Optional
Power Redundancy Scheme :1+1 (with optional power supply)
Installed Qty :1
Max Supported Qty :2
Power Provided :500 watt
Nominal Voltage :AC 120/230 V
Frequency Required :50/60 hertz
80 PLUS Certification :80 PLUS Platinum

Service & Support Details
Service & Support :Limited warranty – parts and labor – 3 years – on-site – response time: next business day